Baby Shower/Party DIY Project

Here are two adorable, easy decorations you can make for any party. I made these for our baby shower which is why they are themed with woodland creatures. You can use any kind of fun art, images or text for these projects. I got these pre-made digital images from a seller on Etsy.
Because we wanted to use real glasses for the party I wanted to make some kind of glass/wine charm that everyone could use to keep track of who's glass is who's. We don't have enough long stem glasses to use my standard wine charms so I thought it would be fun to make something that could clip or sit on the edge of any glass. These are really simple to make...

What you need:
1" round images printed on cardstock (# depends on how many you want to make. I made 20)
mini clothes pins from a craft store
1" craft punch or scissors
packaging tape
hot glue gun
Once you have your images printed the first thing you want to do is use the packaging tape to seal both sides of the paper where you are going to punch/cut out your images. Next, punch/cut out your images into 1" circles. After you have all your images ready simply hot glue them onto the tips of the mini clothes pins and voila! You can stack them neatly in a jar for storage as I've done below and when you want to use them just clip them along the edge of the jar for people to grab.


To match my bunting and other decorations I made this cute mini garland out of the same images I used on the glass clips. Mine says "welcome" but you could make any words, phrases or images to go along with your party theme.

What you need:
1.5" images printed on cardstock (# depending on how long you want to make it. Mine is 15 circles, roughly 3.5ft long)
coordinating paper for backing (I used thin paperboard from the recycling)
1.5" and 1.75" craft punches or scissors
Punch/cut out your 1.5" images and enough 1.75" backs to match. Tie a loop in the end of your string and start your first circle a few inches from that loop. Simply glue the string between your backing and images spacing them approximately 1-1.5" apart as you go. I went back and glued additional 1.5" images on the back of my circles to make it double sided. For an even cleaner look you could double the backing and glue the string between the backing and place your images cleanly on the fronts (this just makes the bump of the string less apparent). When you've finished gluing all your circles, cut your string and create another loop a few inches from the last circle and your done!

I had fun making both of these projects and am happy to share them with you. If you decide to make your own in the future don't forget to send a picture!

No comments:

Post a Comment