Upcycled T-Shirt Episode 2: Toy Bags

Let me start by saying I had so much fun making these little bags out of Gabe's old clothes.  I've been given and giving baby clothes away like crazy but there are a few here and there that I can't bear to let go of. I don't want boxes of clothes sitting around the garage for years so I've been trying to find ways to reuse them. So, for fun I made these little toy bags out of onsies and a sleeper and I just LOVE how they turned out! I'm considering making & selling them as we've got years of kids clothes ahead of us. That and I've been wanting to add new sewing products to the shop because it gives me a break from making bottle caps. :)

Here is what you need to make a t-shirt toy bag: 

baby/kids t-shirt (don't have kids? substitute an adult t-shirt!)
thin cotton rope (can be found at most fabric stores by the foot)

scissors and/or rotary blade and cutting board 

 sewing machine & matching thread 

1) Simply cut off both arms of the shirt or onesie at an angle.

2) Cut off the neck of the shirt

3) Turn the shirt inside out and simply stitch up the sides you just cut. I arched my corners as I sewed to make a smooth, round bottom. 

4) Flip the shirt over and sew a button hole along the hemmed edge about 1/2" from the edge. Fold over the hemmed edge of the t-shirt and sew a decorative stitch to create a channel big enough for the cotton rope to slip through. 

5) Cut a piece of thin cotton rope long enough to slip though the bag and tie a knot. Clip a safety pin at one end of the string and feed it through the channel from the button hole. Tie the ends together with a knot and your done!

 

Make different bags out of your kids favorite clothes to store all their favorite toys! They also make great travel bags for undergarments, bathroom essentials, electronic cords & chargers, etc. Once you've conquered the simple t-shirt bag try mixing it up with some fun designs. Here are some other bags I made...

I used a baby onesie and I followed the same steps 1-3 above to make this simple handled bag.

The onesie itself wasn't anything fancy but it had this adorable Tigger tag on the sleeve so I ripped it off and restitched it onto the main bag.

This polar bear onesie had this adorable design I wanted to keep upright so I cut off the the sleeves and neck and used the top to create the channel opening for the slip rope. Further I thought it would be cute to keep the bottom of the bag looking like a diaper bottom. So I sewed up the leg openings from the outside, keeping them exposed; folded over the butt flap and hand stitched it to the side of the bag.

Just experiment and have fun with it!

Upcycled T-Shirt Episode 1: Sewing Machine Cover

photo courtesy of my lovely sister Molly

I am currently obsessed with making fun stuff out of old t-shirts. So, when my sister sent me photos of her new sewing machine cover I just had to make one of my own and share it with you!

What you need: 
Used t-shirt (just make sure its big enough to cover your machine properly)
Sewing machine
matching cotton thread
Scissors or fabric rotary cutter and cutting mat

When picking your shirt may I suggest something fun from your closet you no longer wear but can't bear to give away.  Mine is a fairly brand new shirt my sister gave me from Idaho that is way to big for me. I like it but don't really wear it so I thought it would be nice to put it on display where I can at least enjoy it.

 

So here it is, real simple...cut both arms off at a slight angle then cut the top off straight across as shown below.  

Turn your shirt inside out and sew up the edges where you just cut off the neck and sleeves.  I eyeballed and rounded my corners so it made a nice clean profile.

 

That's it! Turn it right side out and start using it. If you have a really long shirt you can cut off the bottom and remove the extra bulk. I just tucked the fabric inside itself. I also had a shirt that was a little tight on my machine but I actually like it that way because I can tuck my cords up inside the machine and they won't fall out.  If you want to take this project one step further you can hem in an opening at the top for your handle to make for easy carrying. You can make covers like this for almost anything with the right size t-shirt; computer monitors, toasters, tools, etc. Flip them upside down and they make a great basic bags* for storing or carrying supplies.

(*see below for actual bag tutorials)

 Other upcycled T-shirt crafts we've done include these colorful t-shirt necklaces we made with my mom for a Beta Sigma Phi charity auction. I think my favorite part was shopping, finding and matching all the fun colored shirts we found at thrift stores (and my closet).

The tutorial for these necklaces actually came from The Wondercraft here in Austin. My sisters and I started our t-shirt craft craze there when they visited last fall.



When I made my sewing cover I also made some fun drawstring bags out of baby clothes and I've started making yarn to crochet/braid a rag rug, table runner and pillow decorations. But I'll save those to share with you on a rainy day. :)  For now, here are some other DIY T-Shirt projects I've collected on my "to do someday" bucket list you might like...

Simple Scarf from Ette Studios

Knotted Scarf from Shwin&Shwin

Braided Scarf from Ninth & Bird

Designer Scarf from Joy Beadworks

Braided Scarf from I Still Love You

Wrapped Bracelets from Family Chic

Braided Bracelets from V and Co.

Shopping Bag from Etsy

Produce Bag from Delia Creates

Knitting Yarn from Polka Dot Pineapple

Tea Roses and Ruffles from Tea Rose Home 

Some great Etsy T-shirt products featured by Cosa Verde

JACK POT! I just found an amazing collection of DIY t-shirt crafts. I don't think you'll find a better collection all in one place then you can HERE.

Enjoy. :)

Thrifty Luggage Light Box

A couple weeks ago I found THIS awesome DIY thrifty luggage light box on Instructables and it gave me an idea. I have been wanting to make a light box to burn screen prints and my handy father-in-law was coming for the holidays so I recruited his help.

First we went shopping! We found a florescent light panel (the piece that holds the light bulbs) and flush toggle switch for a couple bucks at the Habitat for Humanity store.  We got a new electronic ballast from Lowes (between $10-15 depending on whether you get a 2 bulb or 4 but we'll get to that).  We had an old computer power cord but needed something to plug it into so we found a computer repair store and scored a scrap part for FREE!  Last but not least, I ordered a piece of square 1/4" acrylic from the glass shop and two (white) black fluorescent light bulbs online. In doing research (white) black fluorescent bulbs are ideal for burning screen prints. However, you can use regular fluorescent or halogen light bulbs (I do not recommend halogen because they contain hazardous chemicals) they just take longer to burn your screen.  I got my bulbs from 1000bulbs.com for a reasonable price and they were here in 2-3 days.

Recap. So, here is your shopping list: 

• luggage in desired size (recommend no smaller then 15-16" long to fit 12" bulbs)
• light panel from a flourescent light fixture (2-4 bulbs; wires intact)
• electronic ballast (2 or 4 bulbs)
• toggle switch (or any switch really)
• old computer power cord and receiving outlet
• 1/4" acrylic cut to size
• fluorescent bulbs or (white) black bulbs
• 4 angle brackets and bolts to hold the acrylic in place
• white semi or gloss paint

If your super thrifty this should cost you around $50-60 (for a 2 bulb box) and no more then $100.  To complete this project you'll also need a drill, sharp box knife or Dremel, some miscellaneous screws/bolts, wire nuts, wire clippers, pliers, paint brush and E6000 glue. You will also need some short of saw and sander to round the edges of your acrylic if you cannot get it cut the exact shape at the store. We cut the acrylic corners ourselves with a scroll saw and sanded the edges to save a few bucks.

First thing we did was gut out the fabric and everything from the bottom of the luggage.  At this point I would recommend painting the bottom first but we got excited and fit all our light components to make sure they would work then painted. The paint simply help reflects the light as well as conceal the unattractive mess you made by pulling out all the fabric (which we did because some older fabrics are not fire retardant and we didn't want to take a chance with exposed wires).

Before you paint you will actually want to cut the holes for your toggle switch and power outlet. We had a Dremel but most luggage can be cut with a sharp box knife and some patience. There is no real logic to placement. We just placed them were we thought most convenient and/or attractive. In the tutorial he placed them both along the side of the luggage, which is a bit easier to wire.

Once you've cut your openings and painted the bottom then you want to install your light components and wire everything together. I had help but its pretty easy and you can find lots of basic wiring information online for ballasts and switches. Just make sure all your exposed wire ends are connected properly or enclosed in a wire nut.

Next we installed four angle brackets along each side of the luggage about 1/4" from the top and simply bolted the acrylic in. How did you secure your nut through 1/4" glass you ask? I took four nuts and secured them to the bottom of the bolt openings with E6000 glue in advance. Just make sure you don't get glue in the threads or it won't work!

Plug it in and your done!

I love that the cord is removable and can be concealed inside the luggage when not in use. I am going to go a step future and add pockets to the upper lid so I can store my screens and screen making supplies in the luggage as well.

Then it will all be hidden in this attractive vintage luggage in my office. :)

But first I had to test it out and make my first screen print ever! I'm sure there will be lots more to come as I keep finding fun vintage images and new ideas for the shop.

TIPS: I used a two bulb fixture hoping the white paint would help reflect the light a bit. If you are simply using this as a light box for drawing then two bulbs is more then enough. However, for screen printing you must be directly above the light source for it to properly burn the image. Unless you are only doing small screens (which I mostly am) then two bulbs is fine but I highly recommend going with a four bulb fixture.  Also, if you just want a simple light box for drawing as shown in the original tutorial then you can frost your acrylic by taking a medium then light sand paper to the bottom.  Just make sure the smooth side is facing up when installing it into the luggage.